Association of the estrogen receptor gene with oral health-related quality of life in patients with dentofacial deformities.

This study aimed to evaluate the associations between oral health-related quality of life (OHRQoL) and patient-associated factors and polymorphisms in the estrogen receptor 1 (ESR1) and 2 (ESR2) genes in patients with dentofacial deformities (DFD). This cross-sectional study included 234 adult individuals. Data such as age, sex, and the type of facial profile (I, II, or III), were collected, and the short-form oral health impact profile 14 (OHIP-14) questionnaire was used to assess their OHRQoL. DNA was collected from oral mucosa cells, and the polymorphisms in ESR1 (rs2234693 and rs9340799) and ESR2 (rs1256049 and rs4986938) were evaluated using real-time polymerase chain reaction. The data were subjected to statistical analysis at a significance level of 5%. Individuals over 28 years of age exhibited worse OHRQoL (p = 0.003) than individuals aged less than or equal to 28 years. Women had worse OHRQoL than men (p < 0.001). Profile II individuals had worse OHRQoL in the social disability domain than profile III individuals (p = 0.030). Genetic analysis showed that rs9340799 was associated with OHRQoL in the functional limitation domain, and GG individuals exhibited worse OHRQoL than individuals carrying the AA/AG genotypes (p < 0.030). In the social handicap domain, individuals with GG genotype in rs9340799 exhibited worse OHRQoL than AG individuals (p < 0.043). Collectively, our results reveal that factors including age, sex, and type of facial profile, are associated with OHRQoL in patients with DFD. In addition, individuals with the GG genotype in rs9340799 (ESR1) may experience a negative impact on OHRQoL in the functional limitation and social handicap domains.

Association of the estrogen receptor gene with oral health-related quality of life in patients with dentofacial deformities

Abstract This study aimed to evaluate the associations between oral health-related quality of life (OHRQoL) and patient-associated factors and polymorphisms in the estrogen receptor 1 (ESR1) and 2 (ESR2) genes in patients with dentofacial deformities (DFD). This cross-sectional study included 234 adult individuals. Data such as age, sex, and the type of facial profile (I, II, or III), were collected, and the short-form oral health impact profile 14 (OHIP-14) questionnaire was used to assess their OHRQoL. DNA was collected from oral mucosa cells, and the polymorphisms in ESR1 (rs2234693 and rs9340799) and ESR2 (rs1256049 and rs4986938) were evaluated using real-time polymerase chain reaction. The data were subjected to statistical analysis at a significance level of 5%. Individuals over 28 years of age exhibited worse OHRQoL (p = 0.003) than individuals aged less than or equal to 28 years. Women had worse OHRQoL than men (p < 0.001). Profile II individuals had worse OHRQoL in the social disability domain than profile III individuals (p = 0.030). Genetic analysis showed that rs9340799 was associated with OHRQoL in the functional limitation domain, and GG individuals exhibited worse OHRQoL than individuals carrying the AA/AG genotypes (p < 0.030). In the social handicap domain, individuals with GG genotype in rs9340799 exhibited worse OHRQoL than AG individuals (p < 0.043). Collectively, our results reveal that factors including age, sex, and type of facial profile, are associated with OHRQoL in patients with DFD. In addition, individuals with the GG genotype in rs9340799 (ESR1) may experience a negative impact on OHRQoL in the functional limitation and social handicap domains.

Individuals requiring orthognathic surgery have more depression and pain than controls.

The objective of this study was to evaluate if individuals with dentofacial deformities (DFD) who require orthognathic surgery are affected more by depression and pain. A case-control study was performed with 195 individuals. In the DFD group, 145 individuals with Class II and III malocclusion requiring orthognathic surgery were selected. The control group was composed of 50 individuals with no DFD. All patients were diagnosed according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). Data were analyzed with a significance level of 0.05. The DFD group more often presented severe depression (p = 0.020) and chronic pain (p = 0.017). They also presented higher prevalence of Nonspecific Physical Symptoms Including Pain (P = 0.002) and Nonspecific Physical Symptoms Excluding Pain (p = 0.002). Concerning TMD symptoms, the DFD group had more myofascial (p = 0.002) and articular pain (p = 0.041). Therefore, the results of this study suggest that depression and pain are more common in individuals with DFD requiring orthognathic surgery compared with individuals without DFD.

Individuals requiring orthognathic surgery have more depression and pain than controls

Abstract The objective of this study was to evaluate if individuals with dentofacial deformities (DFD) who require orthognathic surgery are affected more by depression and pain. A case-control study was performed with 195 individuals. In the DFD group, 145 individuals with Class II and III malocclusion requiring orthognathic surgery were selected. The control group was composed of 50 individuals with no DFD. All patients were diagnosed according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). Data were analyzed with a significance level of 0.05. The DFD group more often presented severe depression (p = 0.020) and chronic pain (p = 0.017). They also presented higher prevalence of Nonspecific Physical Symptoms Including Pain (P = 0.002) and Nonspecific Physical Symptoms Excluding Pain (p = 0.002). Concerning TMD symptoms, the DFD group had more myofascial (p = 0.002) and articular pain (p = 0.041). Therefore, the results of this study suggest that depression and pain are more common in individuals with DFD requiring orthognathic surgery compared with individuals without DFD.

Effect of different factors on patient perception of surgical discomfort in third molar surgery

Abstract: The aim of this study was to evaluate patient perception of surgical discomfort in third molar surgery and the association with clinical variables and polymorphisms associated with the FKBP5, SLC6A4, and COMT genes. This cross-sectional observational study was carried out on 196 participants aged between 18 and 64 years at the Federal University of Paraná in 11 months. The intensity of surgical discomfort was assessed using the QCirDental questionnaire. Data on surgical and individual procedures were also cataloged. The oral health related quality of life was assessed by the Oral Health Impact Profile questionnaire (OHIP-14). The DNA sample was obtained from cells of the oral mucosa. Five markers of the FKBP5, SLC6A4, and COMT genes were genotyped. The data were submitted to statistical analysis with a significance level of 5%. Women reported greater intensity of discomfort associated with third molar surgery compared to men (p = 0.001). In the recessive model, the AA genotype of the rs3800373 marker was associated with greater surgical discomfort (p = 0.026). Therefore, women and individuals of the AA genotype for the rs3800373 marker in the FKBP5 gene reported greater surgical discomfort associated with third molar surgery.

Effect of different factors on patient perception of surgical discomfort in third molar surgery.

The aim of this study was to evaluate patient perception of surgical discomfort in third molar surgery and the association with clinical variables and polymorphisms associated with the FKBP5, SLC6A4, and COMT genes. This cross-sectional observational study was carried out on 196 participants aged between 18 and 64 years at the Federal University of Paraná in 11 months. The intensity of surgical discomfort was assessed using the QCirDental questionnaire. Data on surgical and individual procedures were also cataloged. The oral health related quality of life was assessed by the Oral Health Impact Profile questionnaire (OHIP-14). The DNA sample was obtained from cells of the oral mucosa. Five markers of the FKBP5, SLC6A4, and COMT genes were genotyped. The data were submitted to statistical analysis with a significance level of 5%. Women reported greater intensity of discomfort associated with third molar surgery compared to men (p = 0.001). In the recessive model, the AA genotype of the rs3800373 marker was associated with greater surgical discomfort (p = 0.026). Therefore, women and individuals of the AA genotype for the rs3800373 marker in the FKBP5 gene reported greater surgical discomfort associated with third molar surgery.

Eminectomia para tratamento de luxação recidivante da ATM / Eminectomy for treatment of recurrent TMJ dislocation

Introdução: A luxação da articulação temporomandibular ocorre quando a cabeça da mandíbula se movimenta para fora da fossa articular, fazendo com que a superfície posterior da cabeça da mandíbula fique à frente da eminência articular. Quando ocorrem episódios frequentes, essa condição é referida como luxação recidivante. Embora existam diferentes tratamentos, a eminectomia apresenta-se como uma opção cirúrgica com resultados satisfatórios e prognóstico favorável. Relato de caso: Este trabalho relata o caso de uma paciente com quadro severo de luxações recidivantes associadas à distonia muscular, tratada cirurgicamente por eminectomia. A paciente apresenta acompanhamento de 36 meses, estável, sem sintomatologia ou novos episódios de luxação. A abordagem multidisciplinar apresenta um alto índice de sucesso, e procedimentos cirúrgicos devem ser considerados quando procedimentos clínicos falham. Considerações finais: A eminectomia mostra bons resultados no tratamento da luxação recidivante de ATM, com chances mínimas de recidiva ou danos articulares. Após a cirurgia, os pacientes mostram uma boa função articular... (AU)

Introduction: Dislocation of the temporomandibular joint occurs when the jaw head moves out of the joint fossa causing the posterior surface of the jaw head to be ahead of the joint eminence. When they occur in frequent episodes, this condition is referred like relapsing dislocation. Although there are different treatments, eminectomy presents as a surgical option with satisfactory results and favorable prognosis. Case report: This paper reports the case of a patient with severe recurrent dislocations associated with muscular dystonia, treated through surgical treatment of eminectomy associated with a clinical treatment protocol. The patient has a 36-month followup, stable, without symptoms or new episodes of dislocation. The multidisciplinary approach has a high success rate and surgical procedures should be considered when clinical procedures fail. Final considerations: Eminectomy shows good results in the treatment of recurrent TMJ dislocation, with minimal chances of recurrence or joint damage. After surgery, patients show good joint function... (AU)

Polymorphisms in FGF3, FGF10, and FGF13 May Contribute to the Presence of Temporomandibular Disorders in Patients Who Required Orthognathic Surgery.

BACKGROUND: To evaluate whether genetic polymorphisms in FGF3, FGF10, and FGF13 are associated with temporomandibular disorders (TMD) in patients that presented dentofacial deformities requiring orthognathic surgery. MATERIAL AND METHODS: The sample comprised a total of 113 patients of both sexes. The diagnosis of TMD was performed before orthognathic surgery between Research Diagnostic Criteria for Temporomandibular Disorders (RDC-TMD). According to the TMD assessment, the patients were divided into 3 major groups: myofascial pain, articular disc displacements and other TMD conditions (arthralgia, arthritis, and arthrosis). Genomic DNA was collected from saliva samples and genetic polymorphisms in FGF3 (rs1893047 and rs7932320), FGF10 (rs900379) and FGF13 (rs5931572 and rs5974804) were analyzed by real-time polymerase chain reactions. The association between the TMD conditions and the genetic polymorphisms assessed were analyzed by Poisson Regression. The model was calculated on bivariate and adjusted by sex. The established alpha was 5%. Data were analyzed by using SPSS software (IBM, Armonk, NY). RESULTS: The genetic polymorphisms rs7932320 in FGF3 (P < 0.001) and rs900379 in FGF10 (P < 0.05) were associated with the presence of muscle disorder. The genetic polymorphisms rs1893047 in FGF3, rs900379 in FGF10, and rs5974804 and rs5931572 in FGF13, were associated with the presence of disk displacement (P < 0.05). The genetic polymorphisms rs1893047 and rs7932320 in FGF3, rs900379 in FGF10, and rs900379 in FGF10 were associated with other TMD conditions (P < 0.05). CONCLUSION: Genetic polymorphisms in FGF3, FGF10, and FGF13 genes were associated with temporomandibular disorders in a population with dentofacial deformities.

Large Anterior Oronasal Fistula Repair Using Pedicled Buccal Fat Pad and Fibroepithelial Tissue.

Oronasal fistula (ONF) is the most common complication after palatoplasty in patients with cleft lip and palate (CLP). When left untreated, it may negatively affect the quality of life, leading to development of other comorbidities. This study reports for the first time, the use of a portion of a hyperplasic tissue associated with pedicled buccal fat pad flap to repair a large anterior ONF in a 60-year-old man. The hyperplasic tissue may have developed due to the combination of a loose fitting upper denture and long-term use of dihydropyridine calcium channel blocker (amlodipine besylate). There is controversy in the literature about use of pedicled buccal fat pad flap in the anterior region. However, in this study, we report successful repair of a large anterior ONF using a portion of a fibroepithelial hyperplasic tissue associated with pedicled buccal fat pad flap.

Genetic variants in ACTN3 and MYO1H are associated with sagittal and vertical craniofacial skeletal patterns.

OBJECTIVE: This study aimed to evaluate the association of genetic variants inACTN3 and MYO1H with craniofacial skeletal patterns in Brazilians. DESIGN: This cross-sectional study enrolled orthodontic and orthognathic patients selected from 4 regions of Brazil. Lateral cephalograms were used and digital cephalometric tracings and analyzes were performed for craniofacial phenotype determination. Participants were classified according to the skeletal malocclusion in Class I, II or III; and according to the facial type in Mesofacial, Dolichofacial or Brachyfacial. Genomic DNA was extracted from saliva samples containing exfoliated buccal epithelial cells and analyzed for genetic variants inACTN3 (rs678397 and rs1815739) and MYO1H (rs10850110) by real-time PCR. Chi-square or Fisher's exact tests were used for statistical analysis (α = 5%). RESULTS: A total of 646 patients were included in the present study. There was statistically significant association of the genotypes and/or alleles distributions with the skeletal malocclusion (sagittal skeletal pattern) and facial type (vertical pattern) for the variants assessed inACTN3 (P < 0.05). For the genetic variant evaluated in MYO1H, there was statistically significant difference between the genotypes frequencies for skeletal Class I and Class II (P < 0.05). The reported associations were different depending on the region evaluated. CONCLUSION: ACTN3 and MYO1H are associated with sagittal and vertical craniofacial skeletal patterns in Brazilian populations.

Comparison of the Stability of Mandibular Sagittal Osteotomy Fixation between Two Types of Titanium Miniplates: A Biomechanical Study in Sheep Mandibles.

This study aimed to compare the biomechanical stability of the fixation of mandibular sagittal split osteotomy of the ramus by two types of titanium miniplates in sheep mandibles. Seven preserved sheep mandibles with similar weight and size were selected, dissected with complete removal of soft-tissue structures, and sectioned in their midline. After performing sagittal split osteotomy, 5 mm of advancement was standardized and samples were divided into two groups according to the type of titanium miniplate (GI = seven hemimandibles were fixed with straight titanium miniplate, GII = seven hemimandibles were fixed with L-shaped titanium miniplates), and then subjected to compressive load. The means (standard deviation) of the compressive load and extension values were 70.68 N (22.26) and 63.36 mm (15.60) to straight miniplates, and 78.80 N (32.54) and 70.55 mm (5.42) to L-shaped miniplates. After comparison and statistical analysis, the results showed no significant difference between the two types of titanium miniplates.

Enucleação associada à solução de Carnoy no tratamento de tumor odontogênico ceratocístico / Enucleation associated to Carnoy's solution on treatment of keratocistic odontogenic tumor

Tumor Odontogênico Ceratocístico (TOC) é classificado como uma lesão intraóssea benigna, de origem odontogênica. Apresenta comportamento biológico agressivo e alta taxa de recidiva. Por sua heterogeneidade clínica e histológica, gera controvérsias em relação ao tipo de tratamento. Técnicas, como marsupialização, descompressão, enucleação, ou mesmo, ressecção cirúrgica, são algumas opções de tratamento, podendo associar com outras formas de terapias. O presente trabalho tem por objetivo relatar o caso de um paciente do gênero masculino que apresentava lesão osteolítica na região posterior direita da mandíbula, diagnosticada como tumor odontogênico ceratocístico. O tratamento proposto foi enucleação associada à aplicação de solução de Carnoy. Após 4 anos de pós-operatório, a técnica cirúrgica associada à terapia química mostrou-se eficaz, apresentando resultados satisfatórios. O paciente segue em acompanhamento, sem referir queixas álgicas e funcionais, além de não apresentar alterações estéticas... (AU)

Keratocystic odontogenic tumor is classified as a benign intraosseous and odontogenic lesion. It presents an aggressive biological behavior and great tendency to relapse. Also, it is a pathology that is noteworthy due to its clinical and histological heterogeneity. This diversity reflects on controversies in defining the adequate treatment for these lesions, opting for surgical techniques such as marsupialization, enucleation or resection, even associate with other conservative treatment. By upgrading the knowledge of cell biology, development of diagnostic tests and the improvement of surgical techniques, the treatment of oral diseases suffered major changes in recent decades, making it safer and leading to more predictable results. This study aims to report the case of a male patient, suffering from osteolytic lesion in the posterior mandible, diagnosed as keratocystic odontogenic tumor, which was treated by enucleation associated to application of Carnoy's solution, which is an alternative treatment already described. After 4 years follow-up, proposed treatment has been shown efficient presenting satisfactory results. Patient remains accompanied with no pain and functional complaints as well as no aesthetics alterations... (AU)

Le Fort III osteotomy for severe dentofacial deformity correction associated with hypoplasia of the midface / Osteotomia Le Fort III para correção de deformidade dentofacial severa associada a hipoplasia de terço médio da face

ABSTRACT The combination of orthodontic therapy and orthognathic surgery is a well-established treatment modality for the correction of dentofacial deformities. When these deformities are more severe, involving hypoplastic midface, surgical techniques not used routinely in the treatment of facial changes are required, such as the Le Fort III osteotomy or variations of this technique. Few studies have reported the use of this technique or its modifications in non-syndromic patients. This paper demonstrates the orthodontic-surgical resolution of a patient with dentofacial deformity with severe malocclusion Class III, involving midface hypoplasia, with a modification technique of a Le Fort III osteotomy associated with Le Fort I and sagittal of the rami osteotomies. After three years of postoperative follow-up, the patient demonstrates significant improvement in chewing ability, no functional complaints, and high satisfaction with the aesthetics and improved quality of life.

RESUMO A combinação da terapia ortodôntica com a cirurgia ortognática é uma modalidade de tratamento bem estabelecida para a correção de deformidades dentofaciais. Quando estas deformidades apresentam maior severidade, envolvendo a hipoplasia do terço médio da face, exigem técnicas cirúrgicas não utilizadas como rotina no tratamento das alterações faciais, como a osteotomias Le Fort III ou as variações destas técnicas. Poucos estudos relatam o uso desta técnica ou de suas modificações em pacientes não sindrômicos. Este trabalho tem como objetivo demonstrar uma resolução ortodôntica-cirúrgica de um paciente apresentando deformidade de face com má-oclusão Classe III severa, envolvendo hipoplasia do terço médio facial, com a realização de uma técnica modificada da osteotomia Le Fort III, associada as osteotomias Le Fort I e osteotomia sagital dos ramos mandibulares. O paciente encontra-se com três anos de acompanhamento pós-operatório, com melhora significativa na sua habilidade mastigatória, sem queixas funcionais, relatando alta satisfação com a estética e melhora na qualidade de vida.

Resistance and Stress Finite Element Analysis of Different Types of Fixation for Mandibular Orthognathic Surgery

Abstract The aim of this study was to evaluate the stress and dislodgement resistance by finite element analysis of different types of fixation in mandibular orthognathic surgery. A 3D solid finite element model of a hemi-mandible was obtained. A bilateral sagittal split osteotomy was simulated and the distal segment was advanced 5 mm forward. After the adjustment and superimposing of segments, 9 different types of osteosynthesis with 2.0 miniplates and screws were simulated: A, one 4-hole conventional straight miniplate; B, one 4-hole locking straight miniplate; C, one 4-hole conventional miniplate and one bicortical screw; D, one 4-hole locking miniplate and 1 bicortical screws; E, one 6-hole conventional straight miniplate; F, one 6-hole locking miniplate; G, two 4-hole conventional straight miniplates; H, two 4-hole locking straight miniplates; and I, 3 bicortical screws in an inverted-L pattern. In each model, forces simulating the masticatory muscles were applied. The values of stress in the plates and screws were checked. The dislodgement resistance was checked at the proximal segment since the distal segment was stable because of the screen at the occlusal tooth. The regions with the lowest and highest displacement were measured. The offset between the osteotomized segments was verified by millimeter intervals. Inverted-L with bicortical screws was the model that had the lowest dislodgment and the model with the lowest tension was the one with two conventional plates. The results suggest that the tension was better distributed in the locking miniplates, but the locking screws presented higher concentration of tension.

Resumo O objetivo deste estudo foi verificar o estresse e a resistência ao deslocamento, pela análise de elementos finitos, de diferentes tipos de fixação em cirurgia ortognática mandibular. Um modelo 3D de elementos finitos sólidos de uma hemi-mandíbula foi obtido. Uma osteotomia sagital bilateral foi simulada e o segmento distal foi avançado 5 mm. Após o ajuste e sobreposição dos segmentos, foram simulados 9 diferentes tipos de osteossíntese com miniplacas e parafusos 2.0: A, uma miniplaca reta convencional de 4 furos; B, uma miniplaca reta lock de 4 furos; C, uma miniplaca convencional de 4 furos e um parafuso bicortical; D, uma placa lock de 4 furos e 1 parafuso bicortical; E, uma miniplaca reta convencional de 6 furos; F, uma miniplaca lock de 6 furos; G, duas miniplacas retas convencionais de 4 furos; H, duas miniplacas lock de 4 furos; e I, três parafusos bicorticais em um padrão L invertido. Em cada modelo foram aplicadas forças simulando os músculos mastigatórios. Foram verificados os valores da tensão nas placas e parafusos. A resistência ao deslocamento foi verificada no segmento proximal, uma vez que o segmento distal era estável. Foi medida a região com o maior deslocamento inferior e superior. O deslocamento entre os segmentos osteotomizados foi verificado por intervalos milimétricos. Parafusos bicorticais em L invertido foram o modelo que teve o menor descolamento inferior, e o modelo com a tensão mais baixa foi o de duas placas convencionais. Os resultados sugerem que a tensão foi melhor distribuída nas miniplacas do tipo lock, mas os parafusos de fixação apresentaram maior concentração de tensão.

Resistance and Stress Finite Element Analysis of Different Types of Fixation for Mandibular Orthognathic Surgery.

The aim of this study was to evaluate the stress and dislodgement resistance by finite element analysis of different types of fixation in mandibular orthognathic surgery. A 3D solid finite element model of a hemi-mandible was obtained. A bilateral sagittal split osteotomy was simulated and the distal segment was advanced 5 mm forward. After the adjustment and superimposing of segments, 9 different types of osteosynthesis with 2.0 miniplates and screws were simulated: A, one 4-hole conventional straight miniplate; B, one 4-hole locking straight miniplate; C, one 4-hole conventional miniplate and one bicortical screw; D, one 4-hole locking miniplate and 1 bicortical screws; E, one 6-hole conventional straight miniplate; F, one 6-hole locking miniplate; G, two 4-hole conventional straight miniplates; H, two 4-hole locking straight miniplates; and I, 3 bicortical screws in an inverted-L pattern. In each model, forces simulating the masticatory muscles were applied. The values of stress in the plates and screws were checked. The dislodgement resistance was checked at the proximal segment since the distal segment was stable because of the screen at the occlusal tooth. The regions with the lowest and highest displacement were measured. The offset between the osteotomized segments was verified by millimeter intervals. Inverted-L with bicortical screws was the model that had the lowest dislodgment and the model with the lowest tension was the one with two conventional plates. The results suggest that the tension was better distributed in the locking miniplates, but the locking screws presented higher concentration of tension.

Surgical treatment of mandibular condyle fracture with bicortical screws: case report

Introduction: Mandibular condyle fractures are, of all facial fractures, those with the greatest controversies in relation to its conduct. Patient systemic condition, location and displacement degree of the fracture, mouth opening amplitude, and occlusion alteration are some factors that influence on the decision on conservative or surgical treatment. Pain, mandibular movement limitation, altered dental occlusion, and facial asymmetry are signs and symptoms that indicate condylar fracture. The surgical treatment consists of surgical fracture reduction and subsequent fixing through titanium miniplates and/or screws. Objective: The aim of this study was to report the case of a patient who had parasymphyseal fracture associated with left mandibular condyle fracture, presenting limited excursive movements of the jaw, pain in function, altered dental occlusion, and bruising on chin region. Case report: Due to the type of fracture and patient systemic condition, we decided to open reduction of fractures and stable internal fixation. Conclusion: At 12-month follow-up, the patient showed significant improvement in both clinical and functional condition, demonstrating the effectiveness of the treatment method and technique.

Análise por Elementos Finitos das Forças Mastigatórias em uma Placa de Reconstrução Mandibular / Assessment of masticatory forces in a mandibular reconstruction titanium plate through finite element analysis

Ressecção cirúrgica é um tratamento radical de algumas patologias que acometem a mandíbula e suas estruturas associadas. A técnica baseia-se na remoção total da lesão com uma margem de segurança em toda a sua dimensão, podendo ser ela marginal ou parcial. A escolha dá-se pela proximidade da extensão da lesão com a margem inferior da mandíbula. Em situações de ressecção mandibular parcial, remove-se parcialmente a margem inferior da mandíbula o que, posteriormente, dificulta a reobtenção da estética e funcionalidade do aparelho estomatognático, sendo a área reconstruída com uma placa de reconstrução óssea. A análise de elementos finitos (AEF) é uma forma de análise matemática, que se fundamenta na divisão de uma estrutura em um número finito de pequenas áreas, denominado de elementos finitos. A essa divisão dá se o nome de "malha". Em geral, a AEF possui a capacidade de modelar matematicamente estruturas, tornando-se possível a aplicação de forças em qualquer ponto e/ou direção. Dessa forma, conseguem-se dados sobre a deformação e o grau de tensão inicial, sendo possível, assim, representar situações in vivo, expressando condições compatíveis com o real. O trabalho visa analisar e simular as tensões geradas pelas forças mastigatórias, com o uso de elementos finitos, em simulação de uma mandíbula reconstruída com placa e parafusos de titânio, após sua ressecção parcial... (AU)

Surgical ressection is a radical treatment of some pathologies that affect the mandible and its structures. The technique is based on total removal of the lesion with a safe margin in all extension of the bone. Partial mandible resection results in a difficult to obtain the aesthetic and functionality of the stomatognathic system. In such cases, is recommended a titanium plate commonly used to mandibular reconstruction. Finite Element Analysis (FEA) is a form of math analysis which is based on division of a structure in a finite number of small areas. In general, FEA has the ability to mathematically model structures making possible applying forces in any point and/ or direction. Thereby, it can bring forth datas of displacement and tension being possible representing in vivo situation. This study aims to analyze and simulate the tensions generated by the masticatory forces, using FEA in a mandibular reconstruction with titanium plate after partial resection... (AU)

Evaluation of the impact of orthognathic surgery on quality of life.

Dental treatment and surgery is a well-established method of correcting dentofacial deformities, and such treatment has an impact on the quality of life of individuals. The objective of this study was to evaluate the effect of orthognathic surgery on the quality of life of patients receiving treatment at the Universidade Federal do Paraná - UFPR. Clinical data were evaluated for the control group, and a quality-of-life evaluation questionnaire was completed [Oral Health Impact Profile (OHIP-14)]. For the case group, the same data were gathered along with information regarding their dentofacial deformity. The OHIP-14 questionnaire was also completed at three distinct stages of the experiment. The median age in the control group was 23.5 years. In the case group, the predominant gender was female, and the mean age of patients was 29.4 years. There was a statistically significant association between gender and OHIP-14 (p< 0.001). No such association was observed between age and OHIP-14 scores (p= 0.616). In the control group the OHIP-14 median score was 11.5. In the case group, the average OHIP-14 score at was 18 at T0, 21 at T1, and 8 at T2. The results demonstrated a statistically significant association between the three time stages at which OHIP-14 was analyzed (p< 0.001). There was a smaller reduction in the negative impact for transversal deformities of the jaw when compared with other deformities. Orthognathic surgery led to a reduction in the negative effects on the quality of life of patients.

Evaluation of the impact of orthognathic surgery on quality of life

Dental treatment and surgery is a well-established method of correcting dentofacial deformities, and such treatment has an impact on the quality of life of individuals. The objective of this study was to evaluate the effect of orthognathic surgery on the quality of life of patients receiving treatment at the Universidade Federal do Paraná – UFPR. Clinical data were evaluated for the control group, and a quality-of-life evaluation questionnaire was completed [Oral Health Impact Profile (OHIP-14)]. For the case group, the same data were gathered along with information regarding their dentofacial deformity. The OHIP-14 questionnaire was also completed at three distinct stages of the experiment. The median age in the control group was 23.5 years. In the case group, the predominant gender was female, and the mean age of patients was 29.4 years. There was a statistically significant association between gender and OHIP-14 (p< 0.001). No such association was observed between age and OHIP-14 scores (p= 0.616). In the control group the OHIP-14 median score was 11.5. In the case group, the average OHIP-14 score at was 18 at T0, 21 at T1, and 8 at T2. The results demonstrated a statistically significant association between the three time stages at which OHIP-14 was analyzed (p< 0.001). There was a smaller reduction in the negative impact for transversal deformities of the jaw when compared with other deformities. Orthognathic surgery led to a reduction in the negative effects on the quality of life of patients.

Clinical and radiographic evaluation of maxillary central incisors exposure in patients undergoing maxillary advancement

Abstract Introduction: Patients with dentofacial deformities may undergo orthodontic or orthodontic-surgical treatment. Both modalities can affect esthetics. Objective: This study aims to evaluate clinical and radiographic changes in exposure of maxillary central incisors occurring after orthognathic surgery for maxillary advancement. Methods: A total of 17 patients who underwent orthognathic surgery for maxillary advancement between September, 2010 and July, 2011 were selected. Exposure of maxillary central incisors was evaluated clinically and by lateral cephalograms. Measurements were taken one week before and three months after surgery. Data were paired in terms of sex, age, nasolabial angle, height and thickness of the upper lip, the amount of maxillary advancement, clinical exposure and inclination of maxillary central incisor by statistical tests (CI 95%). Results: After maxillary advancement, incisor clinical exposure had increased even with relaxed lips and under forced smile. Moreover, there was a mean increase of 23.33% revealed by lateral cephalograms. There was an inverse correlation between upper lip thickness and incisors postsurgical exposure revealed by radiographic images (p = 0.002). Conclusions: Significant changes in the exposure of maxillary central incisors occur after maxillary advancement, under the influence of some factors, especially lip thickness.

Resumo Introdução: pacientes portadores de deformidades dentofaciais podem submeter-se a tratamento ortodôntico ou ortodôntico-cirúrgico. Ambos podem modificar a estética do paciente. Objetivo: esse estudo tem por objetivo avaliar, clinicamente e radiograficamente, as mudanças na exposição dos incisivos centrais superiores em pacientes submetidos à cirurgia ortognática de avanço de maxila. Métodos: foram selecionados 17 pacientes submetidos à cirurgia ortognática de avanço maxilar no período de setembro de 2010 a julho de 2011. A exposição dos incisivos centrais superiores foi avaliada clinicamente e por meio de radiografias cefalométricas em norma lateral. Essas medidas foram tomadas uma semana antes e três meses depois da cirurgia. Os dados foram, por meio de testes estatísticos (CI 95%), correlacionados por sexo, idade, ângulo nasolabial, altura e espessura do lábio superior, quantidade de avanço maxilar, exposição clínica e inclinação dos incisivos centrais superiores. Resultados: após o avanço maxilar, houve um aumento da exposição clínica dos incisivos tanto com o lábio superior relaxado quanto sob sorriso forçado. Além disso, obteve-se um aumento médio de 23,33% na exposição dos incisivos nas radiografias cefalométricas em norma lateral. Houve correlação inversa entre a espessura do lábio superior e a exposição pós-cirúrgica dos incisivos nas imagens radiográficas (p = 0,002). Conclusão: mudanças significativas na exposição dos incisivos centrais superiores ocorrem após o avanço maxilar, sob influências de certos fatores, especialmente a espessura do lábio superior.